• 0 Posts
  • 5 Comments
Joined 2 years ago
cake
Cake day: June 21st, 2023

help-circle


  • I’ve always thought that most toilet paper holders are over engineered. You don’t need a little springy rod between 2 posts, you just need an L-shaped bar with the short end screwed to the wall and maybe a little knob on the end of the long side to keep the roll from sliding off. And it’s not that the spring style is especially difficult to use or prone to failure or anything, it just seems like a no-brainer to me to use a one-piece holder with no moving parts instead of one that has at least 4 parts (the base, 2 halves of the roller, and a spring) I’m seeing more of that style around these days, which I appreciate.

    Stove vent hoods that don’t actually vent outside are fucking stupid. My over the range microwave basically just takes smoke from my stove and blows it back out over my head almost directly at the smoke detector.

    I’ve frequently run into shelves, mounting brackets, etc. that seem to totally disregard stud spacing. We got one of those fancy Samsung frame TV’s a while back, to get it to sit so flush to the wall it has its own special mounting brackets, 2 little plates with sort of a modified keyhole slot that you slot 2 little knobs on the back of the TV into. It’s actually not a half bad way to mount a TV, probably one of the easier TV wall mounts I’ve ever personally used, the tv itself is actually pretty damn lightweight (because they moved all the heavy electronics into a separate box you need to hide somewhere) but still I wanted to make sure my fancy TV wouldn’t fall off the wall, so I wanted to mount it to the studs, but of course the spacing of the brackets doesn’t allow that option. I was able to bolt one side a stud but I had to get some toggle bolts for the other side. I’m pretty sure the whole TV is well within the rated weight capacity of one of those toggle bolts in drywall, let alone 2 in drywall and 2 in a stud, but still, it feels like a dumb design choice. (It’s possible that other sizes or newer models do allow for mounting entirely to studs, the size and model I got didn’t)

    I helped a friend replace the wax ring on his toilet recently with one of the newer style rubber gaskets, which as it turns out made the toilet sit imperceptibly higher, which meant that the bolts holding it down were no longer quite long enough to screw the nut onto to tighten it down. With a quick trip to ace hardware and a minute perusing my options, I settled on some Danco zero cut bolts, and I definitely think that is a far superior design to the standard bolts that are probably holding down damn-near every toilet you’ve ever used.

    On the subject of toilets, I can’t think of any particularly good reason for the tank to be a separate piece from the rest of the throne like on most toilets. The gasket and bolts there just add more places for something to start leaking. It’s probably an ease of manufacturing thing, but we have the technology to make one piece toilets now, the two piece style should be obsolete.


  • I think you’re going to get into some “no true Scotsman” territory here pretty quickly, there’s not exactly a worldwide organization that determines the “feminist agenda” or a universally agreed-upon checklist that determines that you are or aren’t a feminist if you check so many boxes. It’s going to depend a bit on who you are, where you come from, etc.

    For example, if you come from some sort of backwards ultra-conservative Christian background, it might be fair to call you a feminist just because you think women should be allowed to wear pants instead of a dress, because in that context you are, even if most of the rest of the world has long-since moved past that stage of feminism.

    I think most if not all TERFs probably hold some amount of views that could be called feminist from certain perspectives. Whether or not they mesh with any of the more mainstream views on feminism is a different matter entirely.

    EDIT: to be clear, TERFs absolutely do not mesh with my idea of feminism, to me you’re way behind the curve on feminism if you’re not recognizing trans women as women.